2014 Lincoln Navigator Owner Manual Printing 1 - Page 360

Audio System Connecting an MP3 Device 359 Using a USB Cable Plug the MP3 Dock Connector to USB cable into a high-power USB port on your DVD-headrest module, and then connect the other end to the player. See the documentation that came with your device for more information. Charging the MP3 Player Battery After you turn the DVD-headrest module on, connect the device to the USB port on your DVD-headrest module Note: Not all devices are able to charge when connected to the USB port. Using an A/V Cable 1. Connect the device to the headphone port using an A/V cable. Note: Use the A/V cable made specifically for the device. Other similar RCA-type cables might not work. 2. Connect the video and audio connectors to the AV-IN ports on your DVD-headrest module, matching the yellow, red and white connectors to the appropriate jacks. Troubleshooting Symptom The device does not power on. Possible cause Your vehicle ignition is not on. The remote control does not have batteries installed. The infrared sensor is The batteries in the remote control are not inoperative. working. The remote sensor eye is blocked. The infrared transmitter is blocking the sensor eye of the component to be controlled The disc does not play. You inserted the disc backward. The disc is defective. Try another disc. The disc is not compatible with the entertainment system. The device code and disc region code do not match. This device is set to Region 1. 2014 Navigator (nav) Owners Guide gf, 1st Printing, June 2013 USA (fus)