2015 Lincoln MKS Owner Manual Printing 1 - Page 213
2015 Lincoln MKS Manual
Page 213 highlights
Roadside Emergencies 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle's engine, or connect the negative (-) cable to a ground connection point if available. WARNING Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. 3. Once the disabled vehicle has been started, run both vehicle engines for an additional three minutes before disconnecting the jumper cables. 4 Removing the Jumper Cables Remove the jumper cables in the reverse order that they were connected. 2 1 Jump Starting 1. Start the engine of the booster vehicle and rev the engine moderately, or press the accelerator gently to keep your engine speed between 2000 and 3000 rpms, as shown in your tachometer. 2. Start the engine of the disabled vehicle. E142665 3 1. Remove the jumper cable from the ground metal surface or connecting point, if available. 2. Remove the jumper cable on the negative (-) terminal of the booster vehicle's battery. 210 MKS (), enUSA