2008 Mazda CX-9 Owner's Manual - Page 593

Switching to the Rear View Monitor Display Shift the shift lever to R with the ignition switch in the ON position to switch the display to the rear view monitor display. Note When the shift lever is shifted from R to another shift lever position, the screen returns to the previous display. Displayable Range on the Screen The images on the screen may be different from the actual conditions. (Screen display) Both bumper ends are not displayed. (Actual view) Both bumper ends are not displayed. Object The figure is an example showing Mazda CX-9. Rear View Monitor Note lThe displayable range varies depending on the vehicle and road conditions. lThe displayable range is limited. Objects under the bumper or around the bumper ends cannot be displayed. lThe distance appearing in the displayed image is different from the actual distance because the rear view parking camera is equipped with a specific lens. lSome optionally installed vehicle accessories may be picked up by the camera. Do not install any optional parts that can interfere with the camera view, such as illuminating parts or parts made of reflective material. lIt may be difficult to see the display under the following conditions, however, it does not indicate a malfunction. • In darkened areas. • When the temperature around the lens is high/low. • When the camera is wet such as on a rainy day or during periods of high humidity. • When foreign material such as mud is stuck around the camera. • When the camera lens reflects sunlight or headlight beams. lIf the camera picks up a high-intensity light such as sunlight reflected off the vehicle body, a bright belt (light line) may appear on the display. (Smear phenomenon) 87