2003 Mercedes SLK-Class Owner's Manual - Page 231

Practical hints Flat tire Adding TIREFIT Remove plug 5 from end of hose 4. Push hose 4 onto valve stem 1. Hold TIREFIT container 3 upside down (hose down) and squeeze firmly several times until entire contents of the container are in tire. Pull hose 4 off and screw tire valve core 6 tightly into the valve stem 1 using valve stem tool 2. 1 Valve stem 2 Valve stem tool 3 TIREFIT container 4 Filler hose 5 Filler hose plug 6 Tire valve core Unscrew the valve cap from valve 1. Remove tire valve core 6 from valve stem 1 using valve stem tool 2. Keep tire valve core 6 clean and dry. Reinstall valve cap on valve stem 1. Install plug 5 onto end of hose 4. i If sealant has leaked out, let it dry. You can then peel it off. Drive the vehicle back and forth very slowly approximately 30 ft (10 m). This distributes the TIREFIT sealant material inside the tire. Take the electric air pump out of the trunk ( page 208). i If the removed tire valve core is dirty, use the spare tire valve core stored with the valve stem tool. 231