2004 Mercedes CL-Class Owner's Manual - Page 187

Controls in detail Power windows Power windows Opening and closing the windows The side windows can be opened and closed electrically. The switches for all the side windows are on the driver's door. The switches for the respective windows are on the passenger door and on the rear center console. Additional switches for the rear windows are located on the rear center console. The closing of the rear side windows can be immediately halted by releasing the switch. The door windows are equipped with the express-close and automatic reversal function. If a door window encounters an obstruction that blocks its path in a circumstance where you pressed the switch past the resistance point and released it to close the window, the automatic reversal function will stop the window and open it slightly. 6 Left rear window 7 Right rear window Warning! 1 Left front window 2 Right front window 3 Right rear window 4 Left rear window 5 Rear window override switch ( page 75) G When closing the windows, make sure that there is no danger of anyone being harmed by the closing procedure. The closing of the door windows can be immediately halted by releasing the switch or, if switch was pressed past the resistance point and released, by pressing the respective switch. If a door window encounters an obstruction that blocks its path in a circumstance where you are closing the window by pressing and holding the switch, by pressing and holding button ‹ on the SmartKey, or by pressing and holding the lock button (vehicles with KEYLESS-GO*) on the door handle, the automatic reversal function will not operate. When leaving the vehicle, always remove the SmartKey from starter switch, take the SmartKey with KEYLESS-GO* with you, and lock your vehicle. 186