2004 Mercedes CL-Class Owner's Manual - Page 263
2004 Mercedes CL-Class Manual
Page 263 highlights
Operation Engine compartment Checking the engine oil level with the control system When checking the oil level the vehicle must be parked on level ground be at normal operating temperature have been stationary for at least five minutes with the engine turned off To check the engine oil level via the multifunction display, do the following: Turn the SmartKey in the starter switch to position 2 or press the KEYLESS-GO start/stop button* twice. The standard display ( page 134) should appear in the multifunction display. Press button k or j on the steering wheel until the following message is seen in the multifunction display: CORRECT MEASUREMENT ONLY IF VEH. LEVEL ADD 1.5 QTS. TO REACH MAX. OIL LEVEL! (Canada: 1.5 LITERS) ADD 2.0 QTS. TO REACH MAX. OIL LEVEL! After about three seconds this message is displayed: ENGINE OIL LEVEL MEASURING NOW! (Canada: 2.0 LITERS) i If you want to interrupt the checking procedure, press the k or j button on the multifunction steering wheel. If necessary, add engine oil. For adding engine oil see ( page 265). For more information on engine oil, see "Technical data" section ( page 372) and ( page 374). One of the following messages will subsequently appear in the indicator: ENGINE OIL LEVEL OK ADD 1.0 QT. TO REACH MAX. OIL LEVEL! (Canada: 1.0 LITER) 262
![](/manual_guide/autos/2004-mercedes-clclass-owners-manual-46637e8/263.png)