2004 Mercedes CL-Class Owner's Manual - Page 47
2004 Mercedes CL-Class Manual
Page 47 highlights
Getting started Driving Starting with KEYLESS-GO* You can start your vehicle without the Smartkey in the starter switch using the KEYLESS-GO start/stop button on the gear selector lever. The SmartKey with KEYLESS-GO must be located in the vehicle. Depress the brake pedal during the starting procedure. Do not depress accelerator. The gear selector lever lock is released. Press KEYLESS-GO start/stop button 1 once. The engine starts automatically if the SmartKey with KEYLESS-GO is in the vehicle. For information on turning off the engine with KEYLESS-GO, see "Turning off the engine with KEYLESS-GO*" ( page 56). Starting difficulties If the engine does not start as described, carry out the following steps: 1 KEYLESS-GO start/stop button Make sure the gear selector lever is set to P. If you are starting the engine with the SmartKey, turn SmartKey in starter switch to position 0 and repeat starting procedure. If you are starting the engine with KEYLESS-GO: Close any doors that may be open to allow for better detection of the SmartKey with KEYLESS-GO. or: Start the engine with the SmartKey as radio signals from another source may be interfering with the SmartKey with KEYLESS-GO. Repeat the starting procedure ( page 45). Remember that extended starting attempts can drain the battery. Get a jump start ( page 351). If the engine does not start after several starting attempts, there could be a malfunction in the engine electronics or in the fuel supply system. Notify an authorized Mercedes-Benz Center. 46
![](/manual_guide/autos/2004-mercedes-clclass-owners-manual-46637e8/47.png)