2004 Mercedes G-Class Owner's Manual - Page 146

Controls in detail Transfer case Switching from HIGH to LOW Switching from LOW to HIGH Messages in the multifunction display If a shift was not completed and the multifunction display shows one of the following messages: TC SHIFT CONDITIONS NOT FULFILLED ! The shift procedure can only be performed when: The engine is running. The gear selector lever for the automatic transmission is in position N. The vehicle is not at standstill. The vehicle speed does not exceed 25 mph (40 km/h). Press upper half ("LOW") of the transfer case switch. Once the shift is complete, gear position L is displayed in the transfer case indicator. ! The shift procedure can only be performed when: The engine is running. The gear selector lever for the automatic transmission is in position N. The vehicle is not at standstill. The vehicle speed does not exceed 40 mph (70 km/h). Press lower half ("HIGH") of the transfer case switch. Once the shift is complete, gear position H is displayed in the transfer case indicator. The shift did not take place. At least one shift condition was not met. Repeat the shift procedure. TC IN NEUTRAL The shift did not take place. The transfer case is in neutral. The gear position N is displayed in the transfer case indicator 1. Repeat the shift procedure. Warning! G i If the shift procedure does not take place press upper half ("LOW") of the transfer case switch again. Put gear selector in D. i If the shift procedure does not take place press lower half ("HIGH") of the transfer case switch again. Put gear selector in D. If TC is in neutral, transmission position P will not hold vehicle. The parking brake must be applied to hold vehicle in place. 146