2004 Mercedes G-Class Owner's Manual - Page 260

Practical hints What to do if ... Messages in the multifunction display Warning! The control system shows warning and malfunction messages in the multifunction display. Certain warning and malfunction messages are accompanied by an audible signal. Address these messages accordingly and follow the additional instructions given in this Operator's Manual. Selecting the malfunction memory menu in the control system ( page 122) displays both cleared and uncleared messages. High-priority messages appear in the multifunction display in red colour. Certain messages of high priority cannot be cleared from the multifunction display using the reset button ( page 112). Other high-priority messages and messages of less immediate priority (regular display colours) can be cleared from the multifunction display using the reset button and are then stored in the malfunction message memory ( page 122). G i Turning the SmartKey in starter switch to position 2 causes all lamps as well as the multifunction display to come on. Make sure they are all in working order before starting your journey. On the pages that follow, you will find a compilation of the most important warning and malfunction messages that may appear in the multifunction display. Highpriority messages appear on a red background. All categories of messages contain important information which should be taken note of and, where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz Light Truck Center. Failure to repair condition noted may cause damage not covered by the Mercedes-Benz Limited Warranty, or result in property damage or personal injury. Warning! G No messages will be displayed if either the instrument cluster or the multifunction display is inoperative. Systems that have a significant influence on handling performance may not be functioning. Contact your nearest authorized Mercedes-Benz Light Truck Center. 260