2004 Mercedes G-Class Owner's Manual - Page 95

Controls in detail Seats Removing and installing front seat head restraints For more information on head restraint adjustment, see the "Getting started" section ( page 36). Warning! i Tilt the seat backrest rearward for easier removal and installation of the head restraints. Front seat head restraints Installing front seat head restraint Press switch 1 upwards and hold for about five seconds. Press the head restraint down until it engages. Adjust head restraint to the desired position. Synchronizing head restraints and seat adjustment fore and aft for front seats If the power supply was interrupted (battery disconnected or discharged), the head restraints and the seat adjustment fore and aft are no longer adjusted automatically. The head restraints and the seat adjustment fore and aft must be resynchronized: Turn SmartKey in starter switch to position 2. Move the seat completely forward ( page 35) and the head restraint fully down ( page 36) and hold the switches for approximately one second. G For your protection, drive only with properly positioned head restraints. Adjust head restraint so that the head restraint supports the back of the head at eye level. This will reduce the potential for injury to the head and neck in the event of an accident or similar situation. Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. Do not interchange head restraints from front and rear seat. 1 Switch Removing front seat head restraint Press switch 1 upwards and hold until the head restraint is fully extended. Pull head restraint out. 95