2005 Mercedes SLK-Class Owner's Manual - Page 269
2005 Mercedes SLK-Class Manual
Page 269 highlights
Controls in detail Useful features Step 4: Continue to press and hold integrated signal transmitter button (1, 2 or 3) while you press and re-press ("cycle") your hand-held remote control transmitter 6 every two seconds until the frequency signal has been learned. Upon successful training, the indicator lamp 4 will flash slowly and then rapidly after several seconds. Proceed with programming step 5 and step 6 to complete. Operation of integrated remote control Switch on the ignition. Select and press appropriate integrated signal transmitter button (1, 2 or 3) to activate the remote controlled device. The integrated remote control transmitter continues to send the signal as long as the button is pressed - up to 20 seconds. Erasing the integrated remote control memory Switch on the ignition. Simultaneously hold down signal transmitter buttons 1 and 3, for approximately 20 seconds, until the indicator lamp 4 blinks rapidly. Do not hold for longer than 30 seconds. The codes of all three channels are erased. i If you sell your vehicle, erase the codes of all three channels. 269
![](/manual_guide/autos/2005-mercedes-slkclass-owners-manual-c7425f1/269.png)