2005 Mercedes SLK-Class Owner's Manual - Page 389
2005 Mercedes SLK-Class Manual
Page 389 highlights
Practical hints Flat tire Preparing the vehicle Prepare the vehicle as described ( page 388). Take the collapsible tire, wheel wrench, wheel bolts, jack, and electric air pump out of the trunk ( page 369). Lifting the vehicle Prevent the vehicle from rolling away by blocking wheels with wheel chocks (not included) or other sizeable objects. One wheel chock is included with the vehicle tool kit ( page 369). When changing wheel on a level surface: Place the wheel chock in front of and another sizable object behind the wheel that is diagonally opposite to the wheel being changed. When changing wheel on a hill: Place the wheel chock and another sizable object on the downhill side blocking both wheels of the other axle. Warning! G The jack is designed exclusively for jacking up the vehicle at the jack take-up brackets built into either side of the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack. Keep hands and feet away from the area under the lifted vehicle. Always firmly set parking brake and block wheels before raising vehicle with jack. Do not disengage parking brake while the vehicle is raised. Be certain that the jack is always vertical (plumb line) when in use, especially on hills. Always try to use the jack on level surface. Be sure the jack arm is fully seated in the jack take-up bracket. Always lower the vehicle onto sufficient capacity jackstands before working under the vehicle. 389