2007 Mercedes R-Class Owner's Manual - Page 310

Controls in detail Loading With the cargo compartment expanded in part ( page 301), use holders behind C-pillars 2 and the cargo tie-down rings in the third-row footwell ( page 300). With the cargo compartment fully expanded ( page 302), use holders behind B-pillars 1 and the cargo tie-down rings in the second-row footwell ( page 300). Open the zipper on the partition net package. Roll out the partition net. Unfold the partition net. The partition net bars must audibly engage. Partition net installed behind the B-pillar Belt hook attached in the second-row footwell Installing the partition net Pulling the partition net tight 1 Holder 2 Partition net bar Hang partition net bar 2 on holder 1 as indicated by the arrow. Push partition net bar 2 forward into holder 1 in direction of arrow. 1 Belt hook 2 Cargo tie-down ring 3 Tightening belt Hook belt hook 1 into cargo tie-down ring 2 in direction of arrow. Pull tightening belt 3 by the loose end in direction of arrow until the partition net is pulled tight. After driving a short distance, make sure the partition net is still tight and, if necessary, pull it tight again. 309