2009 Mercedes CLS-Class Owner's Manual - Page 329

Practical hints Towing the vehicle Installing towing eye bolt Depending on whether you are towing a vehicle or you are being towed, the towing eye bolt can be screwed into threaded holes which are located behind covers on each bumper. The towing eye bolt is supplied with the vehicle tool kit, located underneath the trunk floor (Y page 250). X Take the vehicle tool kit out of the trunk. X X Press mark on cover 1 as indicated by the arrow. Lift cover 1 off to reveal the threaded hole for the towing eye bolt. X X Press on cover 1 as indicated by the arrow. Fold cover 1 down to reveal the threaded hole for the towing eye bolt. Removing cover in rear bumper G Warning! In order to avoid possible serious burns or injury, use extreme caution when removing the rear cover, because the rear exhaust pipe is extremely hot. Fixing towing eye bolt Removing cover in front bumper Example illustration front bumper 1 Towing eye bolt X X Take the towing eye bolt 1 and the wheel wrench from the vehicle tool kit. Screw towing eye bolt 1 clockwise into threaded hole to its stop. Insert wheel wrench into towing eye and tighten towing eye bolt 1 by turning it clockwise. 1 Cover 1 Cover X Z 327