2009 Mercedes CLS-Class Owner's Manual - Page 330
2009 Mercedes CLS-Class Manual
Page 330 highlights
Practical hints Towing the vehicle Removing towing eye bolt X X X X X X Loosen towing eye bolt 1 counterclockwise with wheel wrench. Unscrew towing eye bolt 1. Reinstalling cover: Fit cover 1 (Y page 327) and snap it into place. Store the towing eye bolt and wheel wrench back into the vehicle tool kit. Switch off the ignition and leave the SmartKey in the starter switch. Switch on the hazard warning flasher (Y page 98). ! Make sure that the ignition is switched off. If the starter switch is in position 2, active braking action through the ESP® may otherwise seriously damage the brake system. ! The vehicle may be towed only for distances up to 30 miles (50 km) and at a speed not to exceed 30 mph (50 km/h). Towing with all wheels on the ground G Warning! If circumstances require towing the vehicle with all wheels on the ground, always tow with a tow bar if: Rthe engine will not run Rthere is a malfunction in the brake system Rthere is a malfunction in the power supply or in the vehicle's electrical system This is necessary to adequately control the towed vehicle. Prior to towing the vehicle with all wheels on the ground, make sure the SmartKey is in starter switch position 2. If the SmartKey is left in the starter switch position 0 for an extended period of time, it can no longer be turned in the switch. In this case, the steering is locked. To unlock, remove SmartKey from starter switch and reinsert. Towing with front axle raised When towing the vehicle with the front axle raised, the wheels on the ground have to move freely. X Make sure the ignition is switched on. X X X X X With the vehicle at a standstill, depress the brake pedal and keep it pressed. Shift the automatic transmission into neutral position N. Release the brake pedal. If engaged, release the parking brake. Switch off the automatic central locking (Y page 138). G Warning! With the engine not running, there is no power assistance for the brake and steering systems. In this case, it is important to keep in mind that a considerably higher degree of effort is necessary to brake and steer the vehicle. Adapt your driving accordingly. X X X X Make sure the ignition is switched on. With the vehicle at a standstill, depress the brake pedal and keep it pressed. Shift the automatic transmission into neutral position N. Release the brake pedal. 328