2010 Mercedes CLS-Class Owner's Manual - Page 271
2010 Mercedes CLS-Class Manual
Page 271 highlights
219_AKB; 4; 54, en-US d2ureepe, 2009-05-11T16:21:02+02:00 - Seite 269 Version: 2.11.8.1 Replacing bulbs X 269 Place bulb socket B back into the housing and turn it clockwise until it engages. X Align housing cover : and turn it clockwise until it engages. Bi-Xenon headlamps In vehicles with Bi-Xenon headlamps, the bulbs of the parking and standing lamps are LEDs. High-beam and high-beam flasher bulb (halogen headlamps only)/high-beam flasher bulb (Bi-Xenon headlamps only) X ! Do not replace the LEDs yourself. You could otherwise damage the LEDs or parts of the vehicle. Only have the LEDs replaced at an authorized Mercedes-Benz Center. Replacing bulbs for rear lamps The tail lamps are equipped with HiP bulbs and LEDs. Have them replaced at an authorized Mercedes-Benz Center. Turn housing cover ; counterclockwise and remove it. X Turn bulb socket ? with the bulb counterclockwise and remove it. X Pull the bulb out of bulb socket ?. X Gently press the new bulb into bulb socket ?. X Place bulb socket ? back into the housing and turn it clockwise until it engages. X Align housing cover ; and turn it clockwise until it engages. G Observe Safety notes, see page 266. License plate lamps Front turn signal lamp bulb X Turn bulb socket = with the bulb counterclockwise and remove it. X Gently press onto the bulb and turn it counterclockwise out of bulb socket =. X Gently press the new bulb into bulb socket = and turn it clockwise until it engages. X Place bulb socket = back into the housing and turn it clockwise until it engages. X X Parking and standing lamp bulb Halogen headlamps X Turn housing cover ; counterclockwise and remove it. X Pull out bulb socket A with the bulb. X Pull the bulb out of bulb socket A. X Gently press the new bulb into bulb socket A. X Press bulb socket A back into the lamp. X Align housing cover ; and turn it clockwise. Switch off the ignition. Turn the exterior lamp switch to position $. X Open the trunk. X Loosen screws : of lamp cover to be removed. X Remove lamp cover ;. X Replace the bulb. X Reinstall lamp cover ;. X Retighten screws :. Z Practical hints Tail lamp unit