2010 Mercedes CLS-Class Owner's Manual - Page 78
2010 Mercedes CLS-Class Manual
Page 78 highlights
219_AKB; 4; 54, en-US d2ureepe, 2009-05-11T16:21:02+02:00 - Seite 76 Version: 2.11.8.1 76 Starter switch positions Starter switch positions SmartKey G Observe Safety notes, see page 52. Always remove the SmartKey from the starter switch when the engine is not in operation. This will help to prevent accelerated vehicle battery discharge or a completely discharged vehicle battery. If the SmartKey cannot be turned in the starter switch, the vehicle battery may not be sufficiently charged. X Check the vehicle battery and charge it if necessary (Y page 279). or X Get a jump start (Y page 280). X Controls in detail Starter switch g For removing SmartKey (gear selector KEYLESS-GO Vehicles equipped with the KEYLESS-GO feature are supplied with a SmartKey with integrated KEYLESS-GO function. The SmartKey must be present in the vehicle. Pressing the KEYLESS-GO start/stop button without depressing the brake pedal corresponds to the various starter switch positions (Y page 76). Pressing the KEYLESS-GO start/stop button with the brake pedal firmly depressed will start the engine (Y page 97). The function of the SmartKey overrules the KEYLESS-GO function. X Make sure the automatic transmission is in park position P. X Do not depress the brake pedal. lever must be in park position P) 1 Power supply for some electrical G Observe Safety notes, see page 52. consumers, e.g. wipers 2 Ignition (power supply for all electrical consumers) and driving position 3 Starting position When you switch on the ignition, all lamps in the instrument cluster come on. The lowbeam headlamp indicator lamp, high-beam headlamp indicator lamp, and turn signal indicator lamps will only come on if activated. If a lamp in the instrument cluster fails to come on when the ignition is switched on, have it checked and replaced if necessary. If a lamp in the instrument cluster remains on after starting the engine or comes on while driving, refer to "Lamps in instrument cluster" (Y page 251). If the SmartKey is left in starter switch position 0 for an extended period of time, it can no longer be turned in the starter switch. In this case, the steering is locked. To unlock, remove SmartKey from the starter switch and reinsert. The steering is locked when the SmartKey is removed from the starter switch.