2010 Mercedes CLS-Class Owner's Manual - Page 287
2010 Mercedes CLS-Class Manual
Page 287 highlights
219_AKB; 4; 54, en-US d2ureepe, 2009-05-11T16:21:02+02:00 - Seite 285 Version: 2.11.8.1 Fuses explains the fuse allocation and fuse amperages. Closing: Hook fuse box cover : into the opening at the front. X Press fuse box cover : back on until it engages. X 285 Before replacing fuses X Fuse box in passenger compartment ! Do not use sharp objects such as a screwdriver to open the fuse box cover in the dashboard. You could damage the fuse box cover or the dashboard. X X Open the trunk. Opening: Insert flat, blunt object as a lever into the edge of cover : and remove cover :. X Closing: Install cover :. X X Open the driver's door. Opening: Insert flat, blunt object as a lever in-between the edge of fuse box cover : and the dashboard at the position indicated by the arrow. X Loosen fuse box cover : from the dashboard using the lever. X Using your hands, pull cover : in direction of arrow and remove it. Z Practical hints Engage the parking brake. X Make sure the automatic transmission is in park position P. X Switch off all electrical consumers. X Turn off the engine. X Remove the SmartKey from the starter switch. X Vehicles with KEYLESS-GO: Open the driver's door (this puts the starter switch in position 0, same as with the SmartKey removed from the starter switch). The driver's door then can be closed again. ! The fuse box cover must be properly positioned as described. Otherwise, moisture or dirt could enter the fuse box and possibly impair fuse operation. Fuse box in trunk