2011 Mercedes GL-Class Owner's Manual - Page 112

110 X Memory functions Engage reverse gear. The exterior mirror on the front-passenger side moves to the preset parking position. X Use adjustment button : to adjust the exterior mirror to a position which allows you to see the rear wheel and the curb. The parking position is stored. G Warning! The memory function can still be used when the key has been removed. For this reason, children should never be left unsupervised in the vehicle. They could otherwise become trapped when adjusting the seat or the steering wheel. Seats, steering wheel and mirrors i If you shift the transmission to another position, the exterior mirror on the frontpassenger side returns to the driving position. Calling up a stored parking position setting X G Warning! Only use the memory function on the driver's side when the vehicle is stationary. You could otherwise be distracted from the traffic conditions by the steering wheel and seat moving of their own accord, and as a result cause an accident. With the key in position 2 in the ignition lock and the exterior mirror on the frontpassenger side activated, engage reverse gear. The exterior mirror on the front-passenger side moves to the stored parking position. The exterior mirror on the front-passenger side moves back to its original position: Ras soon as you exceed a speed of 6 mph (10 km/h) Rabout ten seconds after you have disengaged reverse gear Rif you press button = for the exterior mirror on the driver's side X X Memory functions Storing settings With the memory function, you can store up to three different settings, e.g. for three different people. The following settings are stored as a single memory preset: Rposition of the seat, backrest and head restraint Rdriver's side: steering wheel position Rdriver's side: position of the exterior mirrors on the driver's and front-passenger sides Adjust the seat (Y page 96). On the driver's side, adjust the steering wheel (Y page 106) and the exterior mirrors (Y page 108). X Press memory button M and one of the storage position buttons 1, 2 or 3 within three seconds. The settings are stored in the selected preset position. A tone sounds when the settings have been completed. Calling up a stored setting X Press and hold the relevant storage position button 1, 2 or 3, until the seat, steering wheel and exterior mirrors are in the stored position.