1997 Nissan Altima Owner's Manual - Page 64

material. There are pre-cut circles at each anchor point location that should break away from the shelf support material when pressure is applied to them. Remove the bolt after you feel the pre-cut circle separate from the shelf support material. 2. Cut a small slit through the parcel shelf fabric at the anchor point location. Reach through the fabric with a tool such as a pair of needle-nose pliers and remove the pre-cut circle in the parcel shelf support material. 3. Install the bolt through the top strap hook and into the anchor point nut. 4. Be sure to follow all of the instructions that accompany the top strap attaching hardware. APD0647 Installation on front passenger seat WARNING ● Never install a rear-facing child restraint in the front passenger seat. Supplemental air bags inflate with great force. A rear-facing child restraint could be struck by the supplemental air bag in a crash and could seriously injure or kill your child. ● If you install a forward-facing child restraint in the front passenger seat, place the passenger seat as far back as possible. 2-35 A child restraint with a top strap should not be used in the front passenger seat. WARNING ● The 3-point belt in your vehicle is equipped with a locking mode retractor which must be used when installing a child restraint. ● Failure to use the retractor's locking mode will result in the child restraint not being properly secured. The seat could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision.