1999 Nissan Frontier Owner's Manual - Page 101
1999 Nissan Frontier Manual
Page 101 highlights
When no CD or tape is loaded, the radio comes on. Pushing the ON⋅OFF/VOL control knob button again turns the system off. Turn the ON⋅OFF/VOL control knob to adjust the volume. FM-AM band select button Push the button to change from AM to FM1 or FM2 reception. The FM stereo indicator, ST, illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. Clock operation Pressing the clock button alternates the clock and the radio/cassette/CD player options in the display. once the highest broadcasting station is reached, the radio continues in the SEEK mode at the lowest broadcasting station. If button once the lowest broadusing the casting station is reached, the radio continues in the SEEK mode at the highest broadcasting station. SCAN tuning Push the SEEK/SCAN tuning button or for more than 1.5 seconds. SCAN illuminates in the display window, and the radio station blinks. SCAN tuning begins from low to high frequencies or from high to low frequencies, depending on which button is pressed. SCAN tuning stops at each broadcasting station for five seconds. Pushing the button again during this five second period stops SCAN tuning and the radio remains tuned to that station. TUNE/DISC buttons WARNING The radio should not be tuned while driving in order that full attention may be given to the driving operation. Use the and buttons for manual tuning. To move quickly through the channels, hold either of the tuning buttons down. Clock set Depressing the clock and buttons together sets hours. Depressing the clock and buttons together sets minutes. Clock priority mode In this mode the clock is shown in the display. If any radio, cassette or CD functions are activated, the radio, cassette or CD display illuminates for 10 seconds then returns to the clock mode. NOTE: After clock adjustment, the radio is in the clock priority mode. SEEK/SCAN buttons SEEK tuning Push the SEEK/SCAN tuning button or for less than 1.5 seconds. SEEK tuning begins from low to high frequencies or high to low frequencies, depending on which button is pressed, and stops at the next broadcasting station. If using the button Heater, air conditioner and audio systems 4-17