1999 Nissan Frontier Owner's Manual - Page 41

After the child restraint is removed and the seat belt is fully retracted the automatic locking mode (child restraint mode) is canceled. chor bracket, a metric bolt of the dimensions listed below must be used. Bolt diameter: 8.0 mm Bolt length: at least 1.18 in (30 mm) Thread pitch: 1.25 mm WARNING ¼ Do not install a child restraint in the center position of the front bench seat. This position is not suitable for child restraint installation. ARS1191 TOP STRAP CHILD RESTRAINT If your child restraint has a top strap, install the anchor bracket to the provided anchor point. Anchor bracket hardware must be installed. The top strap anchor bracket hardware is available through an authorized NISSAN dealer. Part # 88894-89900 Secure the child restraint with the threepoint seat belt and latch the top strap hook onto the anchor bracket. Make sure the shoulder belt is placed between the seat back and child restraint. To install the an- ¼ A child restraint anchor point is designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances is it to be used for adult seat belts or harnesses. Seats, restraints and supplemental air bag systems 1-35