1999 Nissan Frontier Owner's Manual - Page 33

SEAT BELT EXTENDERS If, because of body size or driving position, it is not possible to properly fit the lapshoulder belt and fasten it, an extender is available which is compatible with the installed seat belts. The extender adds approximately 8 inches (200 mm) of length and may be used for either the driver or front passenger seating position. See an authorized NISSAN dealer for assistance if the extender is required. ARS1058 SEAT BELT MAINTENANCE ¼ To clean the seat belt webbings, apply a mild soap solution or any solution recommended for cleaning upholstery or carpet. Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry. ¼ If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth. ¼ Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced. WARNING ¼ Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts. ¼ Persons who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. Unfastening the belt To unfasten the belt, press the button on the buckle. Seats, restraints and supplemental air bag systems 1-27