2003 Nissan Pathfinder Owner's Manual - Page 129

HEATER OPERATION Heating This mode is used to direct hot air from the floor outlets. 1. Push the air recirculation button to the off position for normal heating. 2. Turn the air control dial to the 3. Turn on the fan control dial. 4. Turn the temperature control dial to the desired position between the middle and the hot position. ¼ For quick heating, move the air recirculation button to the on position. Be sure to return the air recirculation button to the off position for normal heating. position. Defrosting or defogging This mode is used to defrost/defog the windows. 1. Push the air recirculation button to the off position. 2. Turn the air control dial to the 3. Turn on the fan control dial. 4. Turn the temperature control dial to the desired position between the middle and the hot position. ¼ To quickly remove ice or fog from the windows, push the air recirculation button to the on position, the fan control dial to 4 and the temperature control dial to the full hot position. As soon as possible after the window is clear, push the air recirculation button to the off position. position. the midpoint between hot and cold. Heating and defogging This mode heats the interior and defogs the windscreen. 1. Push the air recirculation button to the off position. 2. Turn the air control dial to the 3. Turn on the fan control dial. 4. Turn the temperature control dial to the desired position between the middle and the hot position. position. Operating tips ¼ Clear snow and ice from the wiper blade and air inlet in front of the windshield. This will improve heater operation. ¼ A slight delay may be experienced when turning the air control dial. The system is not malfunctioning, it is only the system motors and solenoids switching from one outlet to another. Ventilation This mode directs outside air from the side and center vents. 1. Push the air recirculation button to the off position. 2. Turn the air control dial to the 3. Turn on the fan control dial. 4. Turn the temperature control dial to the desired position. position. Bi-level heating This mode directs outside air from the side and center vents and hot air from the floor outlets. 1. Push the air recirculation button to the off position. 2. Turn the air control dial to the 3. Turn on the fan control dial. 4. Normally turn the temperature control dial to position. AIR CONDITIONER OPERATION Start the engine, move the fan control dial to the desired (1 to 4) position and push in the air conditioner button to activate the air conditioner. When the air conditioner is on, cooling and 4-4 Heater, air conditioner and audio systems