2003 Nissan Xterra Owner's Manual - Page 150

CAUTION ● Do not rest your foot on the clutch pedal while driving. This may cause clutch damage. ● Fully depress the clutch pedal before shifting to help prevent transmission damage. ● Stop your vehicle completely before shifting into R (Reverse). ● When the vehicle is stopped with the engine running (for example, at a stop light), shift to N (Neutral) and release the clutch pedal with the foot brake applied. If it is difficult to move the shift lever into R (Reverse) or 1 (First), shift into N (Neutral), then release the clutch pedal. Depress the clutch pedal again and shift into R (Reverse) or 1 (First). If your vehicle is equipped with 4-wheel drive, see Transfer case shifting procedures for " four-wheel drive vehicles" later in this section. Suggested upshift speeds The following are suggested vehicle speeds for shifting into a higher gear. These suggestions relate to fuel economy and vehicle performance. Actual upshift speeds will vary according to road conditions, the weather and individual driving habits. ● Two-wheel drive models and four-wheel drive models (2H and 4H position): GEAR CHANGE 1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th MPH (km/h) 15 (24) 25 (40) 40 (64) 45 (72) WSD0064 Shifting To change gears, or when upshifting or downshifting, depress the clutch pedal fully, shift into the appropriate gear, then release the clutch slowly and smoothly. Start the vehicle in 1st gear and shift to 2nd, 3rd and 4th up to 5th gear in sequence according to vehicle speed. You cannot shift directly from 5th gear into R (Reverse). First shift into N (Neutral), then into R (Reverse). 5-14 Starting and driving