2004 Nissan Murano Owner's Manual - Page 221

CVT FLUID Contact your NISSAN dealer if checking or replacement is required. POWER STEERING FLUID BRAKE FLUID CAUTION ¼ Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. ¼ Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT transmission, which is not covered by the NISSAN new vehicle limited warranty. SDI1443 SDI1502 The specified CVT fluid is also described on caution labels located in the engine compartment. Check the fluid level in the reservoir tank. The fluid level should be checked using the HOT range at fluid temperatures of 122 to 176°F (50 to 80°C) or using the COLD range at fluid temperatures of 32 to 86°F (0 to 30°C). CAUTION ¼ Do not overfill. ¼ Use Genuine NISSAN PSF or equivalent. Check the fluid level in the reservoir. If the fluid is below the MIN line or the brake warning light comes on, add Genuine Nissan Super Heavy Duty Brake Fluid or equivalent DOT 3 (US FMVSS No. 116) fluid up to the MAX line. If fluid must be added frequently, the system should be thoroughly checked by your NISSAN dealer. WARNING Use only new fluid. Old, inferior, or contaminated fluid may damage the brake system. The use of improper fluids can 8-12 Maintenance and do-it-yourself