2008 Nissan 350Z Owner's Manual - Page 270
2008 Nissan 350Z Manual
Page 270 highlights
4. Three-digit code: Tire type code (Optional) 5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and year the tire was built. For example, the numbers 3103 means the 31st week of 2003. If these numbers are missing, then look on the other sidewall of the tire. 3 k Tire ply composition and material SDI1607 load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same load rating as the factory installed tire. 6 k Term of "tubeless" or "tube type" Indicates whether the tire requires an inner tube ("tube type") or not ("tubeless"). The word "radial" is shown if the tire has radial structure. Manufacturer or brand name is shown. 2 k TIN (Tire Identification Number) for a Example new tire (example: DOT XX XX XXX XXXX) 1. DOT: Abbreviation for the "Department of Transportation". The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. Two-digit code: Manufacturer's identification mark 3. Two-digit code: Tire size The number of layers or plies of rubber-coated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others. 4 k Maximum permissible inflation pres- 7 k The word "radial" 8 k Manufacturer or brand name sure This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure. 5 k Maximum load rating Other tire-related terminology: In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears white lettering or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the Maintenance and do-it-yourself 8-35 This number indicates the maximum