2009 Nissan Versa Owner's Manual - Page 154

TUNE/SEEK buttons: Manual tuning or button for less than 0.5 Press the seconds for manual tuning. SEEK tuning Press the or button for more than 1.5 seconds to seek through the frequencies. Seek tuning begins from low to high frequencies, or high to low frequencies depending on which button is pressed, and stops at the next broadcasting station. Once the highest broadcasting station is reached, the radio continues in the seek mode at the lowest broadcasting station. Station memory operations: 18 stations can be set for the FM and AM radio to the A, B and C preset button in any combination of AM or FM stations. 1. Press the PRESET A·B·C button to change between storage banks. The radio displays the icon A, B or C to indicate which set of presets are active. 2. Tune to the desired station using manual TUNE or SEEK tuning. Press and hold any of the desired station memory buttons (1 - 6) until a beep sound is heard. (The radio mutes when the select button is pressed.) 3. The channel indicator will then come on and the sound will resume. Programming is now complete. 4. Other buttons can be set in the same manner. If the battery cable is disconnected, or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. or fast forwarding. When the button is released, the compact disc returns to normal play speed. SEEK/TRACK buttons: When is pressed while the compact disc is playing, the next track following the present one starts to play from the beginning. several times to skip several tracks. Press Each time the button is pressed, the CD advances 1 additional track. The track number appears in the display window. (When the last track on the compact disc is skipped, the first track is played). is pressed, the track being played When returns to the beginning. Press several times to skip back several tracks. Each time the button is pressed the CD moves back 1 track. RPT button: When the RPT button is pressed while the compact disc is being played, the play pattern can be changed as follows: 1 TRACK RPT ←→ Normal 1 TRACK RPT: The track that is currently playing will be repeated. Compact disc (CD) player operation Turn the ignition switch to the ACC or ON position, and carefully insert the compact disc into the slot with the label side up. The compact disc is automatically pulled into the slot and starts to play. If the radio is already operating, it automatically turns off and the compact disc begins to play. CD button: When the CD button is pressed with a compact disc loaded and the radio playing, the radio turns off and the last used compact disc starts to play. Rewind and Fast Forward buttons: or button is pressed When the while the compact disc is playing, the compact disc plays at an increased speed while rewinding 4-18 Heater, air conditioner, audio and phone systems