2009 Nissan Versa Owner's Manual - Page 269

4. Read the tire pressure on the gauge stem and compare to the specification shown on the Tire and Loading Information label (if so equipped) or Tire Placard (if so equipped). 5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. LDI0393 6. Install the valve stem cap. 7. Check the pressure of all other tires, including the spare. Size Cold Tire Inflation Pressure Example WDI0394 Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove the gauge. TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall. Front Original Tire: 230 kPa, 33 PSI P185/65R15 Rear Original Tire: P185/65R15 230 kPa, 33 PSI Spare Tire: 420 kPa, 60 PSI T125/70*15 Maintenance and do-it-yourself 8-37