2011 Nissan GT-R Owner's Manual - Page 145
2011 Nissan GT-R Manual
Page 145 highlights
INTERIOR LIGHTS Automatic adjusting function 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the driver side window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for the passenger side window by operating either driver's or passenger's side switch. If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a GT-R certified NISSAN dealer. CAUTION When the battery cable is removed from the battery terminal, do not close either of the front doors. The automatic window adjusting function will not work and the side roof panel may be damaged. The power window has an automatic adjusting function. When the door is being opened, the window is automatically lowered slightly to avoid contact between the window and the side roof panel. When the door is closed, the window is automatically raised slightly. While the automatic adjusting function does not work, the window will be controlled as follows: . . When the door is opened, the window lowers for approximately 2 seconds. While the door is open, the window cannot be raised. MAP LIGHTS Push the button as illustrated to turn the light on or off. If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. Instruments and controls 2-59