2011 Nissan Rogue Owner's Manual - Page 242

CAUTION . When stopping the vehicle on an uphill grade, do not hold the vehicle by depressing the accelerator pedal. The foot brake should be used for this purpose. Do not downshift abruptly on slippery roads. This may cause a loss of control. WARNING Apply the parking brake if the selector lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. If the ignition switch is turned to the OFF or ACC position for any reason while the selector lever is in any positions other than the P (Park), the ignition switch cannot be turned to the LOCK position. If the ignition switch cannot be turned to the LOCK position, perform the following steps: 1. Apply the parking brake when the vehicle is stopped. 2. Turn the ignition switch to the ON position while depressing the foot brake pedal. 3. Move the selector lever to the P (Park) position. 4. Turn the ignition switch to the LOCK position. . SSD0665 Shifting To move the selector lever, : : Push the button while depressing the brake pedal. Push the button. : Just move the selector lever. After starting the engine, fully depress the brake pedal, push the selector lever button and move the selector lever from the P (Park) position to any of the desired shift positions. 5-14 Starting and driving