2011 Nissan Rogue Owner's Manual - Page 284
2011 Nissan Rogue Manual
Page 284 highlights
CAUTION Do not use abrasive cleaners when washing the wheels. Aluminum alloy wheels Wash regularly with a sponge dampened in a mild soap solution, especially during winter months in areas where road salt is used. Salt could discolor the wheels if not removed. wheel and they are not plated wheels. These wheels are clear-coated and require the following special cleaning. They should be regularly washed with a soft sponge soaked in a lot of water. After washing with water, wipe clean with a dry, soft cloth and dry completely. When there is chemical or tire wax, or dirt such as an antifreeze agent on the surface, wash them with water as soon as possible. TIRE DRESSING NISSAN does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a compound. This compound may come off the tire while driving and stain the vehicle paint. If you choose to use a tire dressing, take the following precautions: . Use a water-based tire dressing. The coating on the tire dissolves more easily with an oil-based tire dressing. Apply a light coat of tire dressing to help prevent it from entering the tire tread/ grooves (where it would be difficult to remove). Wipe off excess tire dressing using a dry towel. Make sure the tire dressing is completely removed from the tire tread/ grooves. Allow the tire dressing to dry as recommended by tire dressing manufacturer. CAUTION . The surfaces of the wheels use a different coating process than typical aluminum alloy wheels. Do not use aluminum alloy wheel cleaners or abrasive cleaners to clean the wheels. Using such cleaners could damage the wheel surfaces. Do not use an automatic car wash ¯ for Krom models. The wheel coating may be damaged. Do not use a brush to wash the ¯ wheels on Krom models. The wheel coating may be damaged. CAUTION Follow the directions below to avoid staining or discoloring the wheels: . Do not use a cleaner that uses strong acid or alkali contents to clean the wheels. . Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as ambient temperature. Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. . . . . . . CHROME PARTS ¯ Wheels for Krom models ¯ The wheels on Krom models use a different coating process than typical aluminum alloy Clean chrome parts regularly with a nonabrasive chrome polish to maintain the finish. 7-4 Appearance and care