2011 Nissan Rogue Owner's Manual - Page 92

average fuel consumption by the value above the bar graph, the position of the diamond icon and the value of f since the last reset. Resetting the average fuel consumption is done by pushing A switch * for less than 3 and holding the seconds. The display is updated every 30 seconds. At about the first 0.3 mile (500 m) after a reset, the display shows "----". less than 3 seconds. 5. Range (distance to empty) (dte - miles or km) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated based on the amount of fuel in the fuel tank and the actual fuel consumption. The display is updated every 30 seconds. The dte mode includes a low range warning feature. If the fuel level is low, the warning is displayed on the screen. When the fuel level drops even lower, the dte display will change to If the amount of fuel added is small, the display just before the ignition switch is turned to the "OFF" position may continue to be displayed. When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display. SIC4542 2. Average speed (MPH or km/h) The average speed mode shows the average vehicle speed since the last reset. Resetting is switch done by pushing and holding the B * for less than 3 seconds. The display is updated every 30 seconds. For the first 30 seconds after a reset, the display shows "----". 6. Settings Setting cannot be made while driving. The switch the item. Turn the push to set. Clock: Clock adjustment can be set on this menu. . Set Clock Adjust the time (hour and minute) of the clock. A * A * is used to select and set 3. Driving Distance (miles or km) The Driving Distance mode shows the distance driven since the last reset. The driving distance can be reset by pushing and holding the A switch * for less than 3 seconds. . switch to select or adjust and 4. Elapsed time Elapsed time: The elapsed time mode shows the time since the last reset. The displayed time can be reset A switch * for by pushing and holding the 2-24 Instruments and controls