2013 Nissan Altima Navigation System Owner's Manual - Page 295

ROUTE CALCULATION AND VISUAL GUIDANCE Symptom Waypoints are not included in the auto reroute calculation. Route information is not displayed. Possible cause Waypoints that have been already passed are not included in the auto reroute calculation. Route calculation has not yet been performed. The vehicle is not on the suggested route. Route guidance is set to off. Route information is not provided for certain types of roads (roads displayed in gray). The auto reroute calculation (or detour calculation) suggests the same route as the one previously suggested. A waypoint cannot be added. Route calculations took priority conditions into consideration, but the same route was calculated. Five waypoints are already set on the route, including ones that the vehicle has already passed. Roads near the destination cannot be calculated. The starting point and destination are too close. The starting point and destination are too far away. Possible solution To go to that waypoint again, edit the route. Set the destination and perform route calculation. Drive on the suggested route. Turn on route guidance. This is not a malfunction. This is not a malfunction. A maximum of 5 waypoints can be set on the route. To go to 6 or more waypoints, perform route calculations multiple times as necessary. Reset the destination to a main or ordinary road, and recalculate the route. Set a more distant destination. Divide the trip by selecting one or two intermediate destinations, and perform route calculations multiple times. Set "Use Time Restricted Roads" to off. "SETTING CONDITIONS FOR THE ROUTE CALCULATION" (page 5-33) This is not a malfunction. The suggested route is not displayed. There are time restricted roads (by the day of the week, by time) near the current vehicle location or destination. A part of the route is not displayed. The suggested route includes narrow streets (roads displayed in gray). 11-6 Troubleshooting guide