2013 Nissan Maxima Owner's Manual - Page 103

To turn on the autolight system: 1. Place the headlight switch in the AUTO po1 . sition ᭺ 2. Place ignition in the ON position. 3. The autolight system automatically turns the headlights on and off. Initially, if the ignition switch is placed in the OFF position and a door is opened and left open, the headlights remain ON for a period of time. If another door is opened while the headlights are on, then the timer is reset. To turn the autolight system off, turn the switch to , or position. the OFF, WHA1170 WIC1438 Be sure you do not put anything on top of the autolight sensor located on the top side of the instrument panel. The autolight sensor controls the autolight; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the ignition switch placed in the ON position, your vehicle's battery could become discharged. Headlight beam select 1 ᭺ To select the high beam function, push the lever forward. The high beam lights come on light illuminates. and the Pull the lever back to select the low beam. Pulling and releasing the lever flashes the headlight high beams on and off. 2 ᭺ 3 ᭺ Battery saver system If the ignition switch is placed in the OFF position while the headlight switch is in the or position, the headlights will turn off after a period of time. 2-32 Instruments and controls