2013 Nissan Maxima Owner's Manual - Page 193
2013 Nissan Maxima Manual
Page 193 highlights
REARVIEW MONITOR (if so equipped) When the shift selector is shifted into the R (Reverse) position, the monitor display shows a rearward view from the vehicle. ● Do not put anything on the rear view camera. The rear view camera is installed above the license plate. ● When washing the vehicle with highpressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. ● Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. WARNING ● The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper and may not detect objects close to the bumper or on the ground. LHA1313 Slideshow order: Select the "Random" key to display the images in a random order during a slideshow. Select the "Order List" key to display the images in the order in which they are stored on the storage device. Select the "Back" key or press the BACK button on the control panel to return to the slideshow screen. ● The rear view camera is a convenience but it is not a substitute for proper backing up. Always turn and check that it is safe to do so before backing up. Always back up slowly. ● Objects viewed in the RearView Monitor differ from actual distance because a wide-angle lens is used. ● Make sure that the trunk is securely closed when backing up. ● Underneath the bumper and the corner areas of the bumper cannot be viewed on the RearView Monitor because of its monitoring range limitation. CAUTION Do not scratch the camera lens when cleaning dirt or snow from the lens. 4-34 Monitor, climate, audio, phone and voice recognition systems