2013 Nissan Maxima Owner's Manual - Page 119

Sliding the moonroof To slide the moonroof: ● To fully open the moonroof, push the switch 1 toward the open position until it reaches ᭺ 1 is the second detent. If the switch ᭺ pushed to the first detent, only the sunshade will open. ● To fully close the moonroof, push the switch 2 toward the close position until it reaches ᭺ 2 is the second detent. If the switch ᭺ pushed to the first detent, the moonroof will close but the sunshade will remain open. ● To open or close the moonroof part way, 1 or ᭺ 2 while the moonrelease the switch ᭺ roof is sliding open or closed. The moonroof will stop at the desired position. ● To tilt the moonroof down and close the sunshade at the same time, push the switch 2 to the close position until it reaches the ᭺ second detent. When tilting down: If the control unit detects something caught in the moonroof as it tilts down, the moonroof will immediately tilt up. If the auto-reverse function malfunctions and repeats opening or tilting up the moonroof, keep pushing the tilt down switch within 5 seconds after it happens; the moonroof will fully close gradually. Make sure nothing is caught in the moonroof. Auto-reverse function (when closing or tilting down the moonroof) The auto-reverse function can be activated when the moonroof is closed or tilted down by automatic operation when the ignition switch is placed in the ON position or for a period of time after the ignition switch is placed in the OFF position. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the moonroof occurs. WARNING ● In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints. ● Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing. Tilting the moonroof To tilt the moonroof: ● To tilt the moonroof up, push and release the 3 . When the moonroof is open, it tilt switch ᭺ will automatically close and then tilt up. ● To tilt the moonroof down, push and release 3 or push the switch ᭺ 2 the tilt switch ᭺ toward the close position until it reaches the first detent. WARNING There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the moonroof. When closing: If the control unit detects something caught in the moonroof as it moves to the front, the moonroof will immediately open backward. CAUTION ● Remove water drops, snow, ice or sand from the moonroof before opening. ● Do not place heavy objects on the moonroof or surrounding area. 2-48 Instruments and controls