2014 Nissan Rogue Owner's Manual - Page 209
2014 Nissan Rogue Manual
Page 209 highlights
Rear window and outside mirror (if so equipped) defroster button For additional information, refer to "Rear window and outside mirror (if so equipped) defroster switch" in the "Instruments and controls" section of this manual. Ventilation This mode directs outside air to the side and center vents. button to change to fresh 1. Press the air intake mode. The indicator light will turn off. 2. Press the air flow control button. ● To quickly remove ice or fog from the windows, turn the fan control dial to the highest setting and the temperature control to the full HOT position. position is selected, the air ● When the conditioner automatically turns on if the outside temperature is more than 36°F (2°C). This dehumidifies the air which helps defog indicator autothe windshield. The matically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. The recirculation mode cannot be activated position. in the HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and the side vent outlets. button to change to fresh 1. Press the air intake mode. The indicator light will turn off for normal heating. 2. Press the air flow control button. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. 1. Press the defrost/defog button . Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. button to change to fresh 1. Press the will turn off. air intake mode. The 2. Press the air flow control button. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position between the middle and the hot position. 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. 4-28 Monitor, climate, audio, phone and voice recognition systems