2014 Nissan Rogue Owner's Manual - Page 64

INSTALLING TOP TETHER STRAP (2nd row bench seat) WARNING Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Doing so could damage the child restraint anchorages. The child restraint will not be properly installed using the damaged anchorages, and a child could be seriously injured or killed in a collision. First, secure the child restraint with the LATCH lower anchors (2nd row bench outboard seating positions only) or the seat belt, as applicable. 1. OUTBOARD SEATING POSITIONS If necessary, raise or remove the head restraint/headrest to position the top tether 1 over the top of the seatback. If the strap ᭺ head restraint/headrest is removed, store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to "Head restraint/headrest" in this section for head restraint/headrest adjustment, removal and installation information. LRS0865 LRS2406 Forward-facing - step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag should illuminate. If this status light light is not illuminated refer to "Front passenger air bag and status light" in this section. Move the child restraint to another seating position. Have the system checked by a NISSAN dealer. After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child restraint mode) is canceled. 2nd row bench seat 1 1. Top tether strap ᭺ 2 2. Anchor point ᭺ Safety-Seats, seat belts and supplemental restraint system 1-37