2003 Oldsmobile Silhouette Owner's Manual - Page 397

Care of Safety Belts Keep belts clean and dry. Cleaning the Outside of Your Vehicle The paint finish on your vehicle provides beauty, depth of color, gloss retention and durability. Washing Your Vehicle Do not bleach or dye safety belts. If you do, it may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. The best way to preserve your vehicle's finish is to keep it clean by washing it often with lukewarmor cold water. Don't wash your vehicle in the direct rays of the sun. Use a car washing soap. Don't use strong soaps or chemical detergents. Be sureto rinse the vehicle well, removing all soap residuecompletely. You can get GM-approved cleaning products from your dealer. See GM Vehicle Care/Appearance Materials on page 5-93. Don't usecleaning agents that are petroleum based, or that contain acid or abrasives.All cleaning agents should be flushed promptly and not allowed dry to on the surface, or they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting. Before you enter an automatic car wash, if your vehicle is equipped with the optional power sliding door, be sure to have the switch for the power sliding door override feature enabled. See Power Sliding Door (PSD) on page2-16. High pressure car washes may cause water to enter your vehicle. Weatherstrips Silicone grease on weatherstrips will make them last longer, seal better, and not stick or squeak. Apply silicone grease with a clean cloth at least every six months. During very cold, damp weather more frequent application may be required. See Part D: Recommended Fluids and Lubricants on page 6- 16. 5-90