2006 Polaris FST Touring Owners Manual - Page 41

FEATURES MFD Settings Instrumentation MFD settings can be made with the A engine running or with the engine off. If the engine is off, make sure the stop switch is pressed down and turn the ignition key to the START position briefly to activate the gauge. The gauge will illuminate for about 90 seconds. Use the MFD Control Switch (A) to set B C the MFD display to your preference. The rocker switch has a MODE button (B) and a SET button (C). Standard vs. Metric The MFD will display either standard or metric units of measurement. While viewing a screen that displays measurements (MPH, KPH or temperatures), press and hold the MODE switch until the unit of measurement changes (about 10 seconds). Speedometer/Tachometer The speedometer and tachometer can be viewed in either the analog or the digital display. If the analog display is set to show speedometer readings, the digital screen will automatically display the tachometer (option 1). If the analog is set to show the tachometer, the digital screen will show the speedometer (option 2). To change preferences, press and hold the MODE button for three seconds. When the button is released, the new setting becomes active and screen colors change. See table below. Option 1 2 Analog Display Speed RPM Digital Display RPM Speed Analog Screen Blue "mph" Red "X100rpm" Digital Screen Blue Backlight Red Backlight 38