2008 Polaris Ranger Crew Owners Manual - Page 31
2008 Polaris Ranger Crew Manual
Page 31 highlights
FEATURES AND CONTROLS Instrument Cluster Rider Information Center Diagnostic Mode The wrench icon will display when the gauge is in the diagnostic mode. To exit the diagnostic mode, turn the key switch off and on. Any movement of the tires will also cause the gauge to exit the diagnostic mode. To enter the diagnostics mode: 1. Turn the key switch off and wait 10 seconds. 2. Lock the parking brake. 3. Place the transmission in neutral. 4. Hold the mode/reverse override button and turn the key switch on. Release the switch as soon as the display is activated. 5. Use the mode button to toggle through the diagnostic screens. Clock Screen To reset the clock: 1. Enter the diagnostic mode. 2. Toggle to the clock screen. 3. Press and hold the mode button until the hour display flashes. Release the button. 4. Press and release the mode button once to advance the setting by one hour. Press and hold the mode button to advance the hours quickly. 5. When the desired hour is displayed, wait approximately four seconds, until the minute display flashes. 6. When the display stops flashing, the mode has been set. 7. Use the same procedure to reset the minutes. 28