2009 Polaris Outlaw 525 S Owners Manual - Page 62
2009 Polaris Outlaw 525 S Manual
Page 62 highlights
Operation Break-In Period Perform the following break-in and maintenance procedures carefully. 1. Fill the fuel tank with gasoline. Always 5. Excessive heat build-up during the first exercise extreme caution whenever hanthree hours of operation will damage dling gasoline. close-fitted engine parts. Do not allow engine speed to exceed 7000 RPM dur2. Check the oil level. Add the recoming the first three hours of use. mended oil as needed to maintain the oil level in the proper range. See page 99. 6. Vary throttle positions. Do not operate at sustained idle. 3. Allow the engine sufficient time to warm up before operating. 7. Perform regular checks on fluid levels, controls and areas outlined on the daily 4. Drive slowly at first. Select an open pre-ride inspection checklist. See page area that allows room to familiarize 60. yourself with vehicle operation and handling. 8. At the end of the break-in period (3 hours), change the engine oil and the long and short oil filters. See page 100. Clean the oil screen and drain plug magnet. 59