2009 Polaris Ranger 700 4x4 EFI Owners Manual

2009 Polaris Ranger 700 4x4 EFI Manual

Get 2009 Polaris Ranger 700 4x4 EFI PDF manuals and user guides View all 2009 Polaris Ranger 700 4x4 EFI manuals

2009 Polaris Ranger 700 4x4 EFI manual content summary:

  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 1
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 2
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 3
    WARNING Read, understand, and follow all of the instructions and safety precautions in this manual and on all product labels. Failure to follow the safety precautions could result in serious injury or death. WARNING The engine exhaust from this product
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 4
    operation of your vehicle, be sure to follow the instructions and recommendations in this owner's manual. Your manual contains instructions for minor maintenance, but information about major repairs is outlined in the Polaris Service Manual and should be performed only by a Factory Certified Master
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 5
    reuse of the depictions and/or procedures contained within, whether whole or in part, is expressly prohibited. Printed in U.S.A. 2009 RANGER 4X4 700 EFI Owner's Manual P/N 9922035 2
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 6
    TABLE OF CONTENTS Vehicle Identification Numbers...4 Safety ...5 Features and Controls ...22 Operation ...40 Emission Control Systems ...61 Maintenance ...62 Specifications ...110 Polaris Products...112 Troubleshooting ...113 Warranty ...117 Maintenance Log ...121 Index ...124 3
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 7
    VEHICLE IDENTIFICATION NUMBERS Record your vehicle's identification numbers and key number in the spaces provided. Remove the spare key and store it in a safe place. An ignition key can be duplicated only by ordering a Polaris key blank (using your key number) and mating it with one of your existing
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 8
    of the decals on the vehicle carefully. If any of the decals depicted in this manual differ from the decals on your vehicle, always read and follow the instructions of the decals on the vehicle. If any decal becomes illegible or comes off, contact your Polaris dealer to purchase a replacement
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 9
    SAFETY Safety Decals and Locations Discretionary Warning Age 16 Warning Clutch Cover Warning Clutch Cover Warning WARNING NO STEP • Moving parts hazard under belt-clutch guard. To prevent serious injury, do not operate vehicle with guard removed. • Do not modify engine or clutch. Doing so can
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 10
    sudden braking. • Make sure passenger reads and understands all safety labels. • Watch for branches or other hazards that could enter vehicle. LOCATE AND READ OWNER'S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS. 7175565 7
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 11
    routine maneuvers like turning, or driving on hills or over obstacles, if you fail to take proper precautions. Read and understand your owner's manual and all warnings before operating the vehicle. Age Restrictions This vehicle is an ADULT VEHICLE ONLY. Operation is prohibited for anyone under 16
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 12
    your vehicle. Your safety is involved when these words and symbols are used. Become familiar with their meanings before reading the manual. The safety alert symbol indicates a potential personal injury hazard. WARNING A WARNING indicates a hazardous situation which, if not avoided, may result in
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 13
    Safety WARNING Serious injury or death can result if you do not follow these instructions and procedures, which are outlined in further detail within your owner's manual. • Read this manual and all labels carefully. Follow the operating procedures described. • Never allow anyone without a valid
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 14
    of skidding or sliding out of control. • Never operate your vehicle in fast-flowing water or in water deeper than that specified in this manual. Wet brakes may have reduced stopping ability. Test your brakes after leaving water. If necessary, apply them lightly several times to let friction dry
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 15
    distributed and securely attached. Reduce speed and follow the instructions in this manual for hauling cargo or pulling a trailer. Allow a before getting out of the vehicle. See page 28. • Always apply the service brakes before releasing the park brake. • Always turn off the engine before refueling
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 16
    Operator Safety WARNING SAFETY Make sure your RANGER is in excellent operating condition at all times. We strongly recommend that the operator check all safety components before each ride. Polaris RANGERs are designed to provide safe operation when used as directed. Failure of critical machine
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 17
    engine power. Apply the brakes gradually. When fully stopped, engage the park brake. In the event of an accident, have a qualified service dealer check the complete vehicle for possible damage, including (but not limited to) brakes, throttle and steering. WARNING POTENTIAL HAZARD Operating this
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 18
    vehicle properly in different situations and on different types of terrain. All operators must read and understand the Owner's Manual and all warning and instruction labels before operating the vehicle. WARNING POTENTIAL HAZARD Operating this vehicle on public streets, roads or highways WHAT CAN
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 19
    SAFETY Operator Safety WARNING POTENTIAL HAZARD Operating this vehicle after consuming alcohol or drugs WHAT CAN HAPPEN Could seriously affect your judgment. Could cause you to react more slowly. Could affect your balance and perception. Could result in an accident. HOW TO AVOID THE HAZARD Driving
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 20
    Operator Safety WARNING POTENTIAL HAZARD Attempting jumps and other stunts WHAT CAN HAPPEN Loss of control, accident and/or vehicle overturn HOW TO AVOID THE HAZARD Never attempt jumps and other stunts. Avoid exhibition driving. SAFETY WARNING POTENTIAL HAZARD Operating on frozen bodies of water.
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 21
    use to make sure it's in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the Owner's Manual. WARNING POTENTIAL HAZARD Failure to use extra caution when operating this vehicle on unfamiliar terrain WHAT CAN HAPPEN Loss of control, vehicle
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 22
    HAPPEN Loss of control, accident and/or overturn HOW TO AVOID THE HAZARD Always use the size and type of tires specified in the Owner's Manual for this vehicle. See page 5. Always maintain proper tire pressure as described on the decal and in the Owner
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 23
    or death. Always remove the ignition key when the vehicle is not in use. WARNING After any overturn or accident, have a qualified service dealer inspect the entire vehicle for possible damage, including (but not limited to) brakes, throttle and steering systems. CAUTION Exhaust system components
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 24
    Fuel Safety WARNING SAFETY Gasoline is highly flammable and is explosive under certain conditions. Always exercise extreme caution whenever handling gasoline. Always stop the engine when refueling. Always refuel outdoors or in a well ventilated area. Do not smoke or allow open flames or sparks in
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 25
    FEATURES AND CONTROLS Component Locations Some Polaris vehicles are equipped with special features such as the cab frame. Not all models come with all features. Refer to the specifications section beginning on page 110. Cab Frame (if Equipped) Hip Bar Cargo Box Seat Belt Console Fuel Tank Cap
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 26
    Component Locations Tailgate FEATURES AND CONTROLS Tailgate Latch Release Receiver Hitch CV Boot/Rear Caliper Muffler (Spark Arrestor) Trailer Hitch Bracket This vehicle is equipped with a receiver hitch bracket for a trailer hitch. Trailer towing equipment is not supplied with this vehicle. To
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 27
    FEATURES AND CONTROLS Console Park Brake Lever Gear Selector (Shifter) Mode Button Instrument Gauge Cup Holder 12V Auxiliary Outlets Storage Tray Storage Compartment Auxiliary Outlets The 12-volt receptacles have spade connections on the back that may be used to power an auxiliary light or
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 28
    is moving. NOTE: Maintaining shift linkage adjustment is important to assure proper transmission function. See your dealer if you experience any shifting problems. NOTICE Do not attempt to shift the transmission while the vehicle is moving or damage to the transmission could result. Always shift
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 29
    FEATURES AND CONTROLS Switches Light Switch AWD/Differential Switch Ignition Switch Ignition Switch The ignition switch is a three-position, key-operated switch. The key can be removed from the switch when it is in the OFF position. OFF ON START The engine is off. Electrical circuits are off,
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 30
    switch to engage All Wheel Drive (AWD). See page 60 for AWD operating instructions. Move the rocker switch to the center position (4X4 models) to lock the two wheel drive (2WD). See page 59 for Differential Lock operating instructions. Press the bottom of the switch to unlock the differential and
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 31
    tension after the first 25 hours of operation and every 100 hours thereafter to ensure proper cable tension. See page 92. Always apply the service brakes before engaging or releasing the park brake. 1. Apply the brakes. 2. Pull the park brake lever downward as far as possible. 3. To release the
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 32
    not twisted. 2. Push the latch plate into the buckle until it clicks. 3. Release the strap, it will selftighten. NOTE: The center belt must be tightened manually by pulling on the strap. 4. To release the seat belt, press the square red button in the buckle's center. 29
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 33
    FEATURES AND CONTROLS Storage Box Remove the seat to access the under-seat storage box. Seat Removal Pull up on the front of the seat and slide it toward the front of the vehicle. Install the seat by sliding the tabs into the rear of the seat base. Push down firmly on the front of the seat until
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 34
    Adjustable Steering Wheel The steering wheel can be tilted upward or downward for rider preference. Lift and hold the adjustment lever toward you while moving the steering wheel upward or downward. Release the lever when the steering wheel is at the desired position. FEATURES AND CONTROLS Brake
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 35
    FEATURES AND CONTROLS Instrument Cluster Your RANGER is equipped with an instrument cluster that senses vehicle speed from the right front wheel. The instrument cluster measures distance in miles as well as time, hours of operation and engine RPM. Refer to page 24 for the location of the instrument
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 36
    = Reverse Gear 2 2. AWD Indicator - This indicator illuminates when the AWD switch is in the AWD posi1 tion. 3. Engine Hour Display Indicator 4. Service Interval/Diagnostic Mode Indicator 5. Low Battery and Over Voltage - This warning usually indicates that the vehicle is operating at an RPM too low
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 37
    FEATURES AND CONTROLS Instrument Cluster Rider Information Center Standard Modes Use the yellow mode button located under the speedometer to toggle through the mode options. See page 24. Odometer Mode The odometer records the miles traveled by the vehicle. Trip Meter Mode The trip meter records the
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 38
    Instrument Cluster FEATURES AND CONTROLS Rider Information Center Diagnostic Mode The wrench icon will display when the gauge is in the diagnostic mode. To exit the diagnostic mode, turn the key switch off and on. Any movement of the tires will also cause the gauge to exit the diagnostic mode. To
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 39
    the gauge. This screen is for informational purposes only. Please see your dealer for all major repairs. Programmable service interval When the hours of engine operation equal the programmed service interval setting, the wrench icon will flash for 5 seconds each time the engine is started. When this
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 40
    the button until the hours cycle back to zero. 5. When the desired setting is displayed, wait until the wrench icon stops flashing. The new service interval is now programmed. Miles/Kilometers toggle The display in the tripmeter and odometer can be changed to display either standard or metric units
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 41
    FEATURES AND CONTROLS Instrument Cluster Rider Information Center Downloading Codes The EFI diagnostic mode is for informational purposes only. Please see your Polaris dealer for all major repairs. See page 39 for Blink Codes and Failure Descriptions. Use the following procedure to download blink
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 42
    Instrument Cluster Downloading Codes Blink Code -21 45 46 22 22 23 42 42 51 51 51 52 52 52 53 53 53 54 54 54 55 55 55 56 56 56 57 57 57 58 58 58 41 41 61 FEATURES AND CONTROLS Rider Information Center Failure Description No RPM Signal Loss of Synchronization Barometric Pressure Sensor: Circuit Low
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 43
    OPERATION Break-In Period The break-in period for your new Polaris RANGER is the first twenty hours of operation, or the time it takes to use the first two tanks full of gasoline. No single action on your part is as important as a proper breakin period. Careful treatment of a new engine will result
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 44
    Break-In Period OPERATION Engine and Drivetrain Break-in 1. Fill the fuel tank with gasoline. Heed the gasoline warnings on page 21. 2. Check the oil level. See page 69. Add the recommended oil as needed to maintain the oil level in the normal (safe) operating range. 3. Drive slowly at first.
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 45
    OPERATION Pre-Ride Inspection WARNING If a proper inspection is not done before each use, severe injury or death could result. Always inspect the vehicle before each use to ensure it's in proper operating condition. Item Brake system/pedal travel Brake fluid Front suspension Rear suspension
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 46
    Starting the Engine WARNING OPERATION Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness resulting in severe injury or death. Never run an engine in an enclosed area. 1. Sit in the driver's seat and fasten the seat belt. 2. Apply the brakes. Engage the park
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 47
    OPERATION Stopping the Engine 1. Release the throttle pedal completely and brake to a complete stop. 2. Turn the engine off. 3. Engage the park brake. WARNING A rolling vehicle can cause serious injury. Always engage the park brake after stopping the engine. 44
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 48
    Braking OPERATION 1. Release the throttle pedal completely. 2. Press on the brake pedal evenly and firmly. 3. Practice starting and stopping (using the brakes) until you're familiar with the controls. NOTE: When the throttle pedal is released completely and the engine speed drops near an idle, the
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 49
    Procedure 1. Sit in the driver's seat and fasten the seat belt. 2. After starting the engine and allowing it to warm up, apply the service brakes, and shift the transmission into gear. 3. Check your surroundings and determine your path of travel. 4. Release the park brake. 5. Keeping both hands
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 50
    Driving on Slippery Surfaces OPERATION When driving on slippery surfaces such as wet trails, loose gravel, or ice, be alert for the possibility of skidding and sliding. Under these conditions, follow these precautions: 1. Slow down when entering slippery areas. 2. Maintain a high level of
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 51
    . Avoid climbing steep hills (15° maximum). Use extreme caution when operating on hills, and follow proper operating procedures outlined in the owner's manual. Never climb hills with excessively slippery or loose surfaces. Never open the throttle suddenly. Never go over the crest of a hill at high
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 52
    Driving on a Sidehill (Sidehilling) WARNING OPERATION Crossing hillsides or turning on hills can result in loss of control or vehicle overturn, resulting in severe injury or death. Avoid crossing the side of a hill when possible. When unavoidable, exercise extreme caution. Avoid operating on steep
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 53
    to the pedal repeatedly until braking action is normal. NOTE: After running your vehicle in water, it's critical that you perform the services outlined in the Periodic Maintenance Chart beginning on page 62. Give special attention to engine oil, transmission oil, front and rear gearcases, and
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 54
    Driving Over Obstacles OPERATION Be alert! Look ahead and learn to read the terrain you're traveling on. Watch for hazards such as logs, rocks and low hanging branches. WARNING Severe injury or death can result if your vehicle suddenly comes in contact with a hidden obstacle. Not all obstacles
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 55
    injury or death. Before shifting into reverse, always check for obstacles or people behind the vehicle and follow the reverse operation procedures outlined in this manual. Always back slowly. 52
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 56
    Parking on an Incline OPERATION Avoid parking on an incline if possible. If it's unavoidable, follow these precautions: 1. Place the transmission in gear. 2. Apply the brakes. Engage the park brake. 3. Turn the engine off. 4. Block the rear wheels on the downhill side. WARNING A rolling vehicle
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 57
    with extra caution. Always attach the tow load to the hitch point designated for your vehicle. HEAVY LOADS CAN CAUSE BRAKING AND CONTROL PROBLEMS. Use extreme caution when applying brakes with a loaded vehicle. Avoid terrain or situations that may require backing downhill. USE EXTREME CAUTION when
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 58
    Hauling Cargo OPERATION The RANGER has been designed to carry or tow specific capacities. Always read and understand the load distribution warnings listed on the warning labels. Never exceed the following capacities. Model RANGER 4X4 700 EFI Maximum Capacities (Level Ground) 1500 lbs. (681 kg)
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 59
    OPERATION Dumping the Cargo Box WARNING Operating the vehicle while the cargo box is raised could result in severe injury. The box could close unexpectedly and cause injury to the driver or passenger. The rear tires will also catch the rear of a raised box, damaging the vehicle and creating
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 60
    Towing Loads WARNING OPERATION Towing improperly can alter vehicle handling and may cause loss of control or brake instability, which can result in serious injury or death. Always follow these precautions when towing: Never load more than 150 lbs. (68.1 kg) tongue weight on the towing bracket. Do
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 61
    OPERATION Parking the Vehicle WARNING A rolling vehicle can cause property damage and serious injury. Always engage the park brake after stopping the engine. 1. 2. 3. 4. Apply the brakes. Stop the vehicle on a level surface. Turn the engine off. Engage the park brake. Remove the ignition switch
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 62
    in AWD, the rear wheels rotate at the same speed. The front wheels also rotate at the same speed. See page 60 for AWD operating instructions. 2WD/Rear Differential Locked Move the rocker switch to the center position to lock the differential and operate in two wheel drive (2WD). Locking the
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 63
    causes increased steering effort and some vehicle speed restriction. If the front gearcase remains locked after following these instructions, return the vehicle to your dealer for service. 1. Stop the vehicle. 2. Operate in reverse for at least 10 feet. 3. Stop completely. 4. Shift into low gear and
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 64
    Public Lands in the U.S.A. Your Polaris vehicle has a spark arrestor that was tested and qualified to be in accordance with the USDA Forest Service Standard 5100-1C. Federal law requires that this spark arrestor be installed and functional when the vehicle is operated on public lands. Operation of
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 65
    riding conditions and an average vehicle speed of approximately ten (10) miles per hour. Vehicles subjected to severe use must be inspected and serviced more frequently. Severe Use Definition • Frequent immersion in mud, water or sand • Racing or race-style high RPM use • Prolonged low speed, heavy
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 66
    X Perform these operations more often for vehicles subjected to severe use. E Emission Control System Service - 4 Cycle (California) Q Have an authorized Polaris dealer perform these services. WARNING Improperly performing the procedures marked with a Q could result in component failure and lead
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 67
    MAINTENANCE Periodic Maintenance Chart Perform all services at whichever maintenance interval is reached first. Item Maintenance Interval more often for vehicles subjected to severe use. E Emission Control System Service - 4 Cycle (California) Q Have an authorized Polaris dealer perform these
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 68
    applicable) Park brake cable tension X Engine oil change X Oil filter change X Perform these procedures more often for vehicles subjected to severe use. E Emission Control System Service - 4 Cycle (California) Q Have an authorized Polaris dealer perform these
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 69
    arrestor Idle speed Q Toe adjustment Q Auxiliary brake (if X equipped) Headlight aim X Perform these procedures more often for vehicles subjected to severe use. E Emission Control System Service - 4 Cycle (California). Q Have an authorized Polaris dealer perform these
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 70
    Lubrication Recommendations MAINTENANCE Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart beginning on page 62, or more often under severe use, such as wet or dusty conditions. Items not listed in the chart should be lubricated at the general
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 71
    MAINTENANCE Engine Oil Always check and change the engine oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 62. Always change the oil filter whenever changing oil. Polaris recommends the use of Polaris PS-4 PLUS Performance Synthetic 2W-50 4-cycle oil or a similar oil
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 72
    Engine Oil MAINTENANCE Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 62. Always use the recommended engine oil. Oil Check NOTE: Due to the dipstick entry angle into the crankcase, the oil level will read higher on the bottom side
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 73
    MAINTENANCE Engine Oil Oil and Filter Change CAUTION Hot oil can cause burns to skin. Do not allow hot oil to come into contact with skin. Always change the oil and filter at the intervals outlined in the Periodic Maintenance Chart beginning on page 62. Always change the oil filter whenever
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 74
    Engine Oil MAINTENANCE Oil and Filter Change 12. Remove the dipstick and fill the sump with two quarts (1.9 l) of recommended oil. 13. Shift the transmission to neutral. 14. Apply the brakes. Engage the park brake. 15. Start the engine. Allow it to idle for one to two minutes. 16. Stop the engine.
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 75
    MAINTENANCE Gearcases Gearcase Main Gearcase (Transmission) Front Gearcase Rear Gearcase (4X4) Gearcase Specification Chart Lubricant Premium AGL Synthetic Gearcase Lube Premium Demand Drive Hub Fluid Premium ATV Angle Drive Fluid Capacity 43.6 oz. (1290 ml) 9.3 oz. (275 ml) 18 oz. (532 ml) Fill
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 76
    Gearcases MAINTENANCE Transmission (Main Gearcase) Oil Change The drain plug is located on the bottom of the transmission. Access the drain plug through the drain hole in the skid plate. 1. Remove the fill plug. 2. Place a drain pan under the drain plug. Remove the drain plug. Drain the oil.
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 77
    2. Remove the fill plug. Check the oil level. 3. Add the recommended oil as needed. 4. Reinstall the fill plug. Torque to specification. Oil Change 1. Support the vehicle securely with a Fill Plug jackstand. 2. Remove the front tire on the driver's side. 3. Remove the fill plug. Drain Plug 4. Place
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 78
    Gearcases MAINTENANCE Rear Gearcase Always check and change the rear gearcase oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 62. Refer to the Gearcase Specifications Chart on page 72 for recommended lubricants, capacities and torque specifications. See page 112
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 79
    MAINTENANCE Spark Plugs NOTICE Using non-recommended spark plugs can result in serious engine damage. Always use Polaris-recommended spark plugs. Refer to the specifications section beginning on page 110. Spark Plug Gap/Torque Model RANGER 4X4 700 EFI Electrode Gap .035" (.9 mm) New Plug Torque 18
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 80
    will be few combustion deposits. The electrodes are not burned or eroded. This indicates the proper type and heat range for the engine and the service. NOTE: The tip should not be white. A white insulator tip indicates overheating, caused by use of an improper spark plug or incorrect throttle body
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 81
    MAINTENANCE Cooling System Operation The engine coolant level is controlled or maintained by the recovery system. The recovery system components are the overflow bottle, radiator filler neck, radiator pressure cap and connecting hose. As coolant operating temperature increases, the expanding (heated
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 82
    Cooling System MAINTENANCE Radiator and Cooling Fan Always check and clean the screen and radiator fins at the intervals outlined in the Periodic Maintenance Chart beginning on page 62. Do not obstruct or deflect air flow through the radiator by installing unauthorized accessories in front of the
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 83
    MAINTENANCE Cooling System Radiator Coolant Level Always check and clean the screen and radiator fins at the intervals outlined in the Periodic Maintenance Chart beginning on page 62. Do not obstruct or deflect air flow through the radiator by installing unauthorized accessories in front of the
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 84
    Seat Belts MAINTENANCE Inspect all three seat belts for proper operation before each use of the vehicle. 1. Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click indicates that it's securely latched. 2. Push the red button in the middle
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 85
    (PVT) System WARNING Failure to comply with the instructions in this warning can result in severe injury or • Always follow all recommended maintenance procedures. See your dealer as outlined in the owner's manual. • This PVT system is intended for use on Polaris products only. Do not install
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 86
    water is accidently ingested into the PVT system. Use the following instructions to dry it out before operating. 1. Loosen the bottom screws seconds. 8. Allow the engine RPM to settle to idle speed. Apply the service brakes. Release the park brake and shift the transmission to the lowest available
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 87
    and reinstall, or replace with new plugs. 6. Attempt to start the engine. If necessary, repeat the drying procedure. 7. Take the vehicle to your dealer for service as soon as possible, whether you succeed in starting it or not. 8. If water has been ingested into the PVT follow the procedure on page
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 88
    edges of the filter before installing. 5. Inspect the air box for oil or water deposits. If present, drain them into a suitable container. NOTE: Service the air filter more frequently if the vehicle is operated in wet conditions or at high throttle openings for extended periods. Fuel Filter Your
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 89
    MAINTENANCE Spark Arrestor WARNING Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death. Do not perform service on the spark arrestor while the system is hot. Exhaust system temperatures can reach 1000° F. Allow components to cool
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 90
    Spark Arrestor MAINTENANCE Use the following procedure to periodically purge accumulated carbon from the exhaust pipe. 1. Remove the arrestor clean-out plugs located on the bottom of the muffler. 2. Shift the transmission to neutral. Apply the brakes. Start the engine. 3. Purge accumulated carbon
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 91
    start or operate this vehicle if it has a sticking or improperly operating throttle pedal. Immediately contact your dealer for service if throttle problems arise. Always check the pedal for free movement and return before starting the engine and occasionally during operation. Throttle Freeplay
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 92
    Throttle System MAINTENANCE Throttle Body/Idle RPM Idle RPM is preset by the manufacturer. If the engine idle speed is not satisfactory, please see your Polaris dealer for adjustment. Throttle Freeplay Adjustment 1. Remove the seat. 2. Locate the throttle cable adjuster. 3. Squeeze the end of the
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 93
    MAINTENANCE Brakes The front and rear brakes are hydraulic disc type brakes activated by the brake pedal. See page 31. Brake Fluid Inspect the brake system routinely. Inspect the level of the brake fluid before each operation. Change the brake fluid every two years and any time the fluid becomes
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 94
    Brakes MAINTENANCE Brake Inspection 1. Check the brake system for fluid leaks. 2. Check the brake pedal for excessive travel or a spongy feel. 3. Check the friction pads for wear, damage and looseness. 4. Inspect the brake disc spline and pad wear surface for excessive wear. 5. Change pads when
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 95
    occurs, move the park brake lever to the forward-most position, then inspect and adjust park brake cable tension. NOTE: If performing this service is difficult due to conditions or location, open the hood and temporarily disconnect the park brake connector. This will inactivate the limiting function
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 96
    MAINTENANCE Suspension Adjustments The front and rear suspensions can be adjusted to provide a stiffer suspension, if necessary. 1. Remove the top shock mounting bolts from the inside mounting holes. 2. Reposition the shocks to the outside mounting holes. 3. Reinstall the shock mounting bolts.
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 97
    ) or less. 1/8" (3 mm) Axle and Wheel Nut Torque Specifications Inspect the following items occasionally for tightness, and if they've been loosened for maintenance service. Nut Type Lug Nut Location Front and Rear Nut Torque 90 ft. lbs. (122 Nm) 2-Piece Flange Nut Spindle Nut Hub Retaining Nuts
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 98
    tire wear and vehicle handling, which can result in serious injury or death. Always ensure that all nuts are torqued to specification. Do not service axle nuts that have a cotter pin installed. See your Polaris dealer. Wheel Removal 1. Apply the brakes. Stop the engine. Place the transmission in
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 99
    become dirty during normal operation. Wash the headlights frequently to maintain lighting quality. Hot components can cause burns to skin. Do not service the headlamps until they've cooled sufficiently. Headlight Lamp Replacement 1. Open the hood. 2. Unplug the headlamp from the wiring harness. Be
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 100
    Lights MAINTENANCE Headlight Beam Adjustment X 25 ft. (7.6 m) X 8" (20 cm) 1. Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a wall. 2. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height. 3.
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 101
    MAINTENANCE Battery Your vehicle may have either a sealed battery, which requires little maintenance, or a conventional battery. A sealed battery can be identified by its flat covers on the top of the battery. A conventional battery has six filler caps on the top of the battery. Conventional
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 102
    Battery WARNING MAINTENANCE Improperly connecting or disconnecting battery cables can result in an explosion and cause serious injury or death. When removing the battery, always disconnect the negative (black) cable first. When reinstalling the battery, always connect the negative (black) cable
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 103
    has not been fully charged can damage the battery and result in a shorter life. It can also hinder vehicle performance. Follow the battery charging instructions on page 102 before installing the battery. 1. Ensure that the battery is fully charged. 2. Place the battery in the battery holder. 3. With
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 104
    Battery MAINTENANCE Battery Storage Whenever the vehicle is not used for a period of three months or more, remove the battery from the vehicle, ensure that it's fully charged, and store it out of the sun in a cool, dry place. Check battery voltage each month during storage and recharge as needed
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 105
    charging if the battery becomes very warm to the touch. Allow it to cool before resuming charging. For a refresh charge, follow all instructions carefully. 1. Check the battery voltage with a voltmeter or multimeter. A fully charged battery will register 12.8 V or higher. 2. If the voltage is less
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 106
    Battery MAINTENANCE Battery Charging (Sealed Battery) NOTE: Always verify battery condition before and 1-2 hours after the end of charging. State of Charge 100% 75%-100% Voltage 12.8-13.0 volts 12.5-12.8 volts Action None, check at 3 mos. from date of manufacture May need slight charge, if no
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 107
    MAINTENANCE Cleaning and Storage Washing the Vehicle Keeping your Polaris vehicle clean will not only improve its appearance but it can also extend the life of various components. NOTICE High water pressure may damage components. Polaris recommends washing the vehicle by hand or with a garden hose
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 108
    the Vehicle Polaris recommends the use of common household aerosol furniture polish for polishing the finish on your Polaris vehicle. Follow the instructions on the container. Polishing Tips • Avoid the use of automotive products, some of which can scratch the finish of your vehicle. • Always
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 109
    and liberally apply a weather resistant wax to each polished chrome wheel. Choose a product suitable for chrome finishes. Read and follow the product labels and instructions. Removing Corrosion If light rust is found on the chrome finish, use steel wool (#0000-OTT grade) to remove it. Gently rub the
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 110
    . See page 104. Stabilize the Fuel 1. Fill the fuel tank. 2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer. Follow the instructions on the container for the recommended amount. NOTE: Carbon Clean removes water from fuel systems, stabilizes fuel and removes carbon deposits from
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 111
    any time the fluid looks dark or contaminated) • Coolant (test strength/fill) Fog the Engine 1. Treat the fuel system with Polaris Carbon Clean. Follow the instructions on the container. Start the engine. Allow it to idle for several minutes so the Carbon Clean reaches the injectors. Stop the engine
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 112
    Removal from Storage MAINTENANCE 1. Check the battery electrolyte level and charge the battery if necessary. Install it in the vehicle. Make sure the battery vent hose is routed properly and that it's not pinched or restricted in any way. 2. Make sure the spark plug is tight. 3. Fill the fuel tank
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 113
    SPECIFICATIONS RANGER 4X4 700 EFI Maximum Weight Capacity Dry Weight Fuel Capacity Engine Oil Capacity Coolant Capacity Towing Capacity Hitch Tongue Capacity Max. Cargo Box Load Overall Length Overall Width (box) Overall Width (tires) Overall Height Wheelbase Cargo Box (L x W x H) Ground Clearance
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 114
    SPECIFICATIONS RANGER 4X4 700 EFI Lubrication System Engine Oil Driving System Type Shift Type Gear Reduction - Low Gear Reduction - Reverse Gear Reduction - High Drive Ratio - Front: Drive Ratio - Rear Tire Size - Front Tire Size - Rear Tire Pressure - Front Tire Pressure - Rear Brakes, Front/Rear
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 115
    POLARIS PRODUCTS Part Number 2870791 2876244 2876245 2873602 2873603 2871653 2872276 2870465 2871654 2872277 2871323 2871534 2871312 2871322 2871423 2871460 2871515 2871551 2871329 2872073 2872348 2871326 2872189 2871956 2871076 Description Engine Lubricant Fogging Oil (12 oz. Aerosol) PS-4 PLUS
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 116
    in high range Starting out going up a steep incline Driving at low RPM or ground speed (3-7 MPH) Insufficient warm-up at low ambient temperatures TROUBLESHOOTING Solution Use low range during loading. Use low range. See warnings on page 48. Drive at a higher speed or use low range more frequently
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 117
    TROUBLESHOOTING Possible Cause Park brake is not completely disengaged Park brake connector malfunction the connector if temporary continued operation is necessary, see your dealer promptly for service Engine Doesn't Turn Over Possible Cause Low battery voltage Loose battery connections Loose
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 118
    Engine Pings or Knocks Possible Cause Poor quality or low octane fuel Incorrect ignition timing Incorrect spark plug gap or heat range TROUBLESHOOTING Solution Replace with recommended fuel See your dealer Set gap to specs or replace plugs Engine Runs Irregularly, Stalls or Misfires Possible Cause
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 119
    TROUBLESHOOTING Possible Cause Out of fuel Kinked or plugged fuel vent line Water is present in fuel Fouled or defective spark plugs Worn or defective spark
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 120
    and set-up of your vehicle is very important in ensuring trouble-free operation. Purchasing a machine in the crate or without proper any damages which occur during trailer transit or as a result of unauthorized service or the use of unauthorized parts. In addition, this warranty does not
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 121
    THE DEALER IS YOUR RESPONSIBILITY). Polaris suggests that you use your original selling dealer; however, you may use any Polaris Servicing Dealer to perform warranty service. Please work with your dealer to resolve any warranty issues. Should your dealer require any additional assistance they will
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 122
    must be done by an authorized Polaris dealer. If you move or are traveling within the country where your vehicle was purchased, Warranty or Service Bulletin repairs may be requested from any authorized Polaris dealer who sells the same line as your vehicle. Outside the Country where your vehicle
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 123
    WARRANTY U.S.A. EPA Emissions Limited Warranty This All Terrain Vehicle (ATV) or Off Road Utility Vehicle (ORUV) emissions limited warranty is in addition to the Polaris standard limited warranty for this vehicle. Polaris warrants that this vehicle is; (1) designed, built, and equipped to conform
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 124
    MAINTENANCE LOG Use the following chart to record periodic maintenance. DATE MILES (KM) OR HOURS TECHNICIAN SERVICE PERFORMED / COMMENTS 121
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 125
    MAINTENANCE LOG DATE MILES (KM) OR HOURS TECHNICIAN SERVICE PERFORMED / COMMENTS 122
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 126
    MAINTENANCE LOG DATE MILES (KM) OR HOURS TECHNICIAN SERVICE PERFORMED / COMMENTS 123
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 127
    INDEX A Accessory Outlets ...24 Adding Coolant ...78 Adjustments Headlight Beam ...97 Park Brake ...92 Rear Suspension ...93 Shock Spring ...93 Throttle Freeplay ...89 Age Restrictions...8 Air Filter ...85 Air Filter Cleaning...85 All Wheel Drive...60 All Wheel Drive Lock Switch ...27 Arrestor,
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 128
    INDEX D Disengaging AWD ...60 Downloading Blink Codes ...38-39 Drive Belt Wear ...113 Drivetrain Break-In...41 Driving Downhill ...49 Driving in Reverse ...52 Driving on a Sidehill...49 Driving on Slippery Surfaces ...47 Driving Over Obstacles ...51 Driving Procedure...46 Driving Through Water ...50
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 129
    INDEX I Idle Speed ...89 Ignition Switch...26 Indicator, Service Interval ...36-37 Inspection Axle Nuts ...94 Brakes ...91 Park Brake ...91 Pre-Ride ...42 Seat Belts ...81 Steering Wheel...92 Throttle Freeplay ...88 Wheel
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 130
    ...24 Plugs, Fouled ...77 Plugs, Spark ...76-77 Polaris Products ...112 Polishing the Vehicle ...105 Pre-Ride Inspection...42 Pressure, Tire ...5 Programmable Service Interval . 36-37 Public Lands ...61 PVT Break-In ...41 PVT Drying...83 PVT System Operation ...82 PVT Warning ...83 S Safety Decals
  • 2009 Polaris Ranger 700 4x4 EFI | Owners Manual - Page 131
    INDEX S Suspension Adjustment, Rear ...93 Switches...26-27 AWD Switch ...27 Differential Lock Switch ...27 Ignition...26 Light...27 V Vehicle Identification Numbers...4 Vehicle Immersion ...84 Vehicle Transport ...109 W Warning Symbols ...9 Warning, Transmission Modification 83 Washing the Vehicle
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131