2009 Polaris Ranger 700 4x4 EFI Owners Manual - Page 99
2009 Polaris Ranger 700 4x4 EFI Manual
Page 99 highlights
MAINTENANCE Lights When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. WARNING Poor lighting while driving can result in severe injury or death. Headlight and taillight lenses become dirty during normal operation. Wash the headlights frequently to maintain lighting quality. Hot components can cause burns to skin. Do not service the headlamps until they've cooled sufficiently. Headlight Lamp Replacement 1. Open the hood. 2. Unplug the headlamp from the wiring harness. Be sure to pull on the connector, not on the wiring. 3. Turn the lamp counterclockwise to remove it. 4. Install the new lamp. Wiring Harness NOTE: Make sure the tab on the lamp locates properly in the housing. 5. Reinstall the harness assembly into the headlight assembly. Brake Lights When the brake pedal is depressed, the console brake light comes on. Check the brake light before each ride. 1. Turn the ignition switch to the ON position. 2. Depress the brake pedal. The brake light should come on after about 10 mm (0.4 in.) of pedal travel. If the light doesn't come on, check the bulb. 96