2011 Polaris RZR 170 Owners Manual - Page 71
2011 Polaris RZR 170 Manual
Page 71 highlights
MAINTENANCE Spark Arrestor WARNING Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death. • Do not perform service on the spark arrestor while the system is hot. Allow components to cool sufficiently before proceeding. • Wear eye protection and gloves. • Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas. To remove accumulated carbon, clean the spark arrestor at the intervals recommended in the Periodic Maintenance Chart beginning on page 53. 1. Remove the six bolts and remove the arrestor from the end of the muffler. 2. Use a non-synthetic brush to clean the arrestor screen. A synthetic brush may melt if components are warm. If necessary, Arrestor Screen blow debris from the screen with compressed air. 3. Inspect the screen for wear and damage. Replace the arrestor if damage is found. 4. Reinstall the arrestor. 5. Torque the bolts to 7 ft. lbs. (9.5 Nm). 68