2011 Polaris RZR 170 Owners Manual - Page 81

2011 Polaris RZR 170 Manual

Get 2011 Polaris RZR 170 PDF manuals and user guides View all 2011 Polaris RZR 170 manuals

Page 81 highlights

MAINTENANCE Lights Daytime Running Lights Lamp Replacement If the daytime running lights do not operate, replace the lamps. POLARIS recommends that you install replacement lamps obtained from your authorized POLARIS dealer. 1. Disconnect the lights from the harness. 2. Remove the rubber cover from the back of the light assembly. 3. Press the lamp retainer inward and turn it counter-clockwise to remove it. Note the position of the lamp positioning tab, then carefully pull the lamp out. 4. Install the new lamp. Make sure the filament is horizontal. 5. Reinstall the lamp retainer. Press the retainer inward and turn it clockwise about 1/4 turn. 6. Start the engine to make sure the lights come on. If the lights do not operate, see your POLARIS dealer for service. 7. Reinstall the rubber cover, and reconnect the lights to the harness. Tail Light Lamp Replacement If the brakelight doesn't work, the lamp may need to be replaced. 1. Remove the two screws securing the lens cover. Remove the lens cover. 2. Remove the lamp and replace it with a new recommended lamp. 3. Test the light for proper operation. 4. Reinstall the lens cover. Lamp Cover Screws 78

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
78
MAINTENANCE
Lights
Daytime Running Lights Lamp Replacement
If the daytime running lights do not operate, replace the lamps.
POLARIS recommends that you install replacement lamps obtained
from your authorized POLARIS dealer.
1.
Disconnect the lights from the harness.
2.
Remove the rubber cover from the back of the light assembly.
3.
Press the lamp retainer inward and turn it counter-clockwise to
remove it. Note the position of the lamp positioning tab, then care-
fully pull the lamp out.
4.
Install the new lamp. Make sure the filament is horizontal.
5.
Reinstall the lamp retainer. Press the retainer inward and turn it
clockwise about 1/4 turn.
6.
Start the engine to make sure the lights come on. If the lights do not
operate, see your POLARIS dealer for service.
7.
Reinstall the rubber cover, and reconnect the lights to the harness.
Tail Light Lamp Replacement
If the brakelight doesn't work, the
lamp may need to be replaced.
1.
Remove the two screws
securing the lens cover.
Remove the lens cover.
2.
Remove the lamp and replace
it with a new recommended
lamp.
3.
Test the light for proper oper-
ation.
4.
Reinstall the lens cover.
Screws
Cover
Lamp