2013 Polaris Cross Country Owners Manual - Page 39
2013 Polaris Cross Country Manual
Page 39 highlights
Instruments, Features and Controls Tool Kit The tool kit can be used to perform most basic maintenance items. Tools provided in the tool kit include: 1. 4 mm Ball Drive Allen Wrench 2. 5 mm Ball Drive Allen Wrench 3. 6 mm Ball Drive Allen Wrench 4. 4 mm / 6 mm Open End Wrench 5. 8 mm / 10 mm Open End Wrench 6. Combination Phillips / Slot Screw Driver 7. Rear Shock Absorber / Tire Pressure Gauge 8. Fuse Puller 1 2 3 4 5 6 7 8 License Plate The license plate module is equipped with an LED light to illluminate the license plate. Always make sure the license plate is properly installed before operating the motorcycle. 1. Position the license plate at the center of the rear fender, aligning the bottom edge of the license plate to the fender mounting bracket. 2. Secure the license plate with appropriate fasteners. 3. If an accessory trunk is installed to the vehicle, the license plate mount must be installed to the trunk to comply with regulations. Install the bracket and light assembly supplied with the accessory. Align the top edge of the license plate with the top edge of the license plate window. The fender license plate light must also be covered. 37