2014 Polaris 600 Switchback Assault Owners Manual - Page 44
2014 Polaris 600 Switchback Assault Manual
Page 44 highlights
FEATURES Instrument Cluster Rider Information Center Security System (Ignition Lock System) Locking the System With Your Personal Security Code 1. Start the engine and lock the parking brake. 2. Press and hold the MODE and SEL buttons for 3 seconds, then release. SECURE OFF should be displayed. If not, repeat this step. 3. Wait until ENTER CODE displays, then press and release SEL to advance the digit. When the first digit of your security code is displayed, press and release MODE to accept the digit. TIP: If the ENTER CODE screen exits due to inactivity, repeat step 2. 4. Continue to use SEL and MODE to select and accept the remaining two digits of the code. 5. After accepting the third digit, view the display screen. SECURE ON displays if the system locks. Engine speed is now limited and the snowmobile cannot be driven. TIP: When the engine is running, the display will alternate between SECURE ON and ENTER CODE. 6. If BAD CODE displays, the screen will then return to the ENTER CODE screen. Repeat steps 3-5 to re-enter the security code. 42