2014 Polaris 600 Switchback Assault Owners Manual - Page 90
2014 Polaris 600 Switchback Assault Manual
Page 90 highlights
MAINTENANCE Brakes Hydraulic Brake Inspection Inspect the brake lever reserve before each use of the snowmobile. See page 55. Brake pads must be replaced when the brake pad material becomes thinner than the backing plate (approximately 1/16 inch or 1.5 mm). A kit is available for replacing brake pads. See your dealer. WARNING! Brake failure during operation can result in serious injury or death. Properly functioning brakes are vital to your safety. Be sure the brake pads do not drag on the disc and that brake lever travel is not excessive. Always replace brake pads when the brake pad material becomes thinner than the backing plate (approximately 1/16 inch or 1.5 mm). Brake Components 1. Brake Disc 2. Brake Caliper 3. Anti-rattle springs (come with brake pad kit) 4. Brake Pad Material (Replace when thickness is less than 1/ 16 inch/1.5 mm). 2 3 4 1 Excessive Lever Travel Hydraulic brakes are selfadjusting, but if excessive brake pad clearance develops, bring the snowmobile to an authorized POLARIS dealer for inspection and adjustment. 88